KTM Duke 390 OBD Reader - KTM Duke 390 Forum
 3Likes
Reply
 
LinkBack Thread Tools
post #1 of 14 Old 01-15-2014, 06:28 AM Thread Starter
Senior Member
 
Join Date: Dec 2013
Posts: 263
(Thread Starter)
KTM Duke 390 OBD Reader

Does anyone know the OBD protocol on the 390? Can I use one of these connectors along with Tune ECU?

KTM Plug Adaptor for TUNE ECU Software [LEKTM16ADAP] - 14.99 : Lonelec, Fault Code Readers & ECU Diagnostic Equipment
Asiaoildude is offline  
Sponsored Links
Advertisement
 
post #2 of 14 Old 03-30-2014, 09:41 AM Thread Starter
Senior Member
 
Join Date: Dec 2013
Posts: 263
(Thread Starter)
And on this topic someone has hooked what looks like a OBD2 connector into the KTM connector with a Greddy Informeter (an OBDII reader).


KTM Duke 390 OBD2 gauge - YouTube
Asiaoildude is offline  
post #3 of 14 Old 03-30-2014, 02:29 PM
Senior Member
 
Join Date: Oct 2013
Location: Far North QLD Oz
Posts: 817
So far Ive heard a few trying to connect via TuneECU but its the same as the 690 series IV where the ECU isnt cracked and wont connect or show up in the software. The connector after the wired in 6 pin is similar to the PT connector by the way.
Sorry I cant be much more help.
Dan1 is offline  
post #4 of 14 Old 03-30-2014, 09:43 PM Thread Starter
Senior Member
 
Join Date: Dec 2013
Posts: 263
(Thread Starter)
Quote:
Originally Posted by Dan1 View Post
So far Ive heard a few trying to connect via TuneECU but its the same as the 690 series IV where the ECU isnt cracked and wont connect or show up in the software. The connector after the wired in 6 pin is similar to the PT connector by the way.
Sorry I cant be much more help.
I think the problem is CAN bus.
Asiaoildude is offline  
post #5 of 14 Old 03-31-2014, 12:47 AM Thread Starter
Senior Member
 
Join Date: Dec 2013
Posts: 263
(Thread Starter)
The pintouts have been kindly shared by Robyn Lee

Here it is:

KTM Duke connector
#1 wh +12V
#2 bl CAN hi
#3 ye CAN lo
#6 bl/ye GND

OBD2 16 pin connector
OBD2 16 pin connector
#16 +12V
#4 #5 GND
#6 CAN hi
#14 CAN lo
Asiaoildude is offline  
post #6 of 14 Old 05-17-2014, 04:29 AM
Junior Member
 
Join Date: Dec 2013
Posts: 18
So aod if get any btooth obd reader, I can set by using the above pin? Sorry noob question.
Dude35 is offline  
post #7 of 14 Old 11-18-2015, 12:33 AM
Junior Member
 
Join Date: Nov 2015
Location: Seattle, WA
Posts: 17
Quote:
Originally Posted by Dude35 View Post
So aod if get any btooth obd reader, I can set by using the above pin? Sorry noob question.
Did you every figure this question out? We can just get any generic OBD reader?
ThingOne is offline  
post #8 of 14 Old 11-18-2015, 08:50 AM
Junior Member
 
Join Date: Nov 2015
Posts: 2
Garage
Quote:
Originally Posted by ThingOne View Post
Did you every figure this question out? We can just get any generic OBD reader?
Generic OBD reader works fine, but, no ability to tune...
Fasteddy is offline  
post #9 of 14 Old 12-09-2015, 11:14 AM
Senior Member
 
Join Date: Jan 2014
Posts: 182
I just ordered the ODB cable as well as the connectors needed to be able to connect to the ECU. I'll try to use both th KTM tool and the Tune ECU software to find out if any AFR tunning is possible.

I'll keep you posted on the findings.
bahawton likes this.
Bender is offline  
post #10 of 14 Old 02-25-2016, 02:32 AM
Junior Member
 
Join Date: Feb 2016
Posts: 7
I have the same adapter(but paid twice the amount :'( ) and i got myself a cheap elm327 Bluetooth mini OBD2 scanner. You wont get all sensor datas though

The stuff that wont be displayed are:

RPM
Gear Indicator
Stand Indicator
Fuel Level

I heard that KTM used different PIDs for the ECUs on the KTM Duke 390's (200 too)
I have an Indian KTM, i dont know if the EU or NA have the same issue as their ECU wires (or maybe the ECU itself) is different..

Anyway, the RPM data and the others ARE ACCESSIBLE, but you gotta find which PID it correlates to. Not gonna experiment on my KTM though,
Kevin is offline  
Reply

User Tag List

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome