KTM Duke 390 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. Engine and Technical Discussion
    Hello, I just done valve shims and now engine is not starting, I bought this engine and never tested, just before fitting in motorcycle I decided to check valve clearance so everything would be done at once, what I found left side Exhaust and Intake was a little of range.... look at my photo I...
  2. Engine and Technical Discussion
    Hi friends, just to share with you... I took courage and decided/regulate the valves by my self, I took a ton of photos, but in summary my bike is 20.000+ kms and the valves were a little bit closed (the valve cover was never opened before), i measure exhaust 0.13 / 0.15 and inlet 0.08 / 0.09...
  3. KTM 390 Adventure Engine And Technical Discussion
    Hi all, My bike has 3000km. I just changed the air filter. Oil level is normal. When I start the engine from cold initially there is a laudable hesitation and then the computer gives it a bit more “gas” so that the rpm rise to 3800 and then back down to 1900 after a second or two. Then it...
  4. Duke 390 & RC390 News And Updates
    Hello family, I’ve had my 2019 duke 390 for about a week and put 300 miles on it. I have been worrying about the initial service at 600 miles and been calling dealers to get a price check on the valve check. carolina ktm has told me that ktm has changed the initial valve check to the first...
1-4 of 4 Results
Top