KTM Duke 390 Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 · (Edited)
So the other day I decided to REALLY wash my 390, got the undercarraige (Yes, I did spray it with water like an ass) and everything real well. It started right after the wash and I rode it up the street and around into the garage, however tried to start it day before yesterday and nothing. It turns on, I hear the pump start, but when I hit the electric ignition. Nothing. Same today.

I fear I might have gotten some water in some electrical bits, and we can't seem to get a dry sunny day here in Texas to save our lives for the last week, so I havent been able to get it outside.

For now I'm going to go unplug all the connections I can and give them a good wipe.
 

·
Registered
Joined
·
616 Posts
Welcome from Kennesaw GA!

You can hit most of the connectors with electrical contact cleaner. Also, have you checked the battery? The water might have shorted something out and caused the battery to run down while it was sitting.
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #3 ·
Battery is good. Going to go at it with a brush tomorrow on all the contacts.
 
1 - 3 of 3 Posts
Top